woensdag 21 september 2016

There it goes...

OSCAR finally left UHasselt, in a very heavy and sturdy wooden box.


... bye bye, baby Aury!

See you in Kiruna!


dinsdag 20 september 2016

S.U.Z.Y. meets OSCAR

Our experiment passed its last review, and is finally ready to fly.
With this news, a lot of local news channels and science enthusiasts got really interested in us, and that's how we ended up not only on the local TV channel TV Limburg and in the national news paper Het Laatste Nieuws...

... but also tagged on Stijn Meuris' photo!


It was quite something to meet the man who sang about lovely satellite S.U.Z.Y, spinning quietly above the Earth and watching us from a distance.

Tot binnenkort, S.U.Z.Y!

woensdag 7 september 2016

Work work work work work....

Neverending work in space business!
Even if you actually stop at the stratosphere ;-)

Our electronics team needed to assemble lots of tiny components on our very cool Printed Circuit Boards (PCBs), which are those fabulously practical sheets that hold all our connections. Since all the resistors, capacitors, amplifiers, and other elements of the circuit were not there yet, someone needed to spend long hours to position them on top of the right connections, paste them in place, and then "bake them" (the correct term is "solder") in order to create the link between the component itself and the electrical pathway hidden inside the PCB.

This requires quite some patience, good eyes, and a whole lot of time!
That's why we had an overkill of footage for this little timelapse video about the PCB finalization process.

The second head you see in the video is Thijs Vandenryt's, a brilliant engineer who volunteered to help us! Thank you Super TV!

donderdag 1 september 2016

... and this is how Aury was born!

A while back we learnt about how circuits are born.

Now it is time to praise the team who brought Aury up!

Our magnetometer is basically ready to fly, and that is because Jarda and Jelle (J&J) dedicated a lot of hard work and sacrifice to their little creation.

Here on the left is a very 'early' photo of Aury, when she was still a baby magnetometer, and needed to be connected to a few expensive lab tools to operate.

During the last few months, J&J made it possible for her to fly with her own equipment, designed especially to be light weight and "inexpensive" (she is still quite precious), and perfectly fit for the application we need.

The principle to probe the magnetic field is based on the splitting of degenerate energy levels, their photoluminescence, and the visualization of the whole process via the dips in the intensity of the exciting microwaves.
Before you get your minds in the gutter for this last element, make sure you refresh your memory on how we can use diamond to sense the magnetic field...

So, we need a microwave excitation to split the energy levels, a laser and a light sensor to create and detect the photoluminescence, and of course a lot of electronics and software to write down in files what is happening, so that we can look at the data afterwards.

This translates into having to "break down" the voltage, in order to power up the various components, which is done with the circuit on the left, then generating the frequency which will "time" the entire setup through the means of a square signal wave, which is handled by the circuit on the right, and of course in driving the laser correctly (which means making sure it always gets the right amount of current).









The only two commercial components which will fly with Aury are those which generate the microwave sweep itself (the timing of it is given by the home-built square wave signal generator).

But now, where is the actual diamond in all this?

It's where you see the green of the laser shining... right in her heart!


And beware, this is her last naked photo: she will get a nice dress by the time she will fly, because she won't be a little girl anymore!

P.S.: our testing also continues... on Youtube!

donderdag 11 augustus 2016

This is how circuits are born

It is due time that we celebrate our engineers/magicians, who are the actual reason why OSCAR has survived all this time.
Let us keep the magnetometer aside for now. A dedicated explanation of how that works will come on a separate blog post. If we focus on solar cells, you may remember that we talked about measuring their efficiency a while back.
The famous Current-Voltage characteristic you heard about back then, is exactly what we want to obtain for each of our devices while they fly. Those characteristic curves are made by couples of Current and Voltage values, collected -for example- by applying Voltage X (in water analogy, this was the pressure), and reading the current Y that "comes out" of the system (or the flow of water through the pipe).
Sounds easy enough, but it is actually quite complicated to do it, if you have to design the whole circuit...

This is where Steven (forgot about him?) came to save us.
He is designing the measurement instrumentation for us. Roughly, this means that he has programmed a little computer chip to send specific signals to a net of amplifiers, resistors and capacitors. These signals, just like the whole circuit components web, are finely tuned to make sure that the correct Voltage is selected, and that the readout of the Current is accurate and within the limits that the computer chip can withstand without breaking.
Why do we have to be so precise?
Home-built dedicated circuits are normally cheaper than the fancy equipment we would have in a laboratory. That's why we can actually afford to mount them on the balloon and let them crash -maybe very harshly- at the end of the ride. Lab tools are also very heavy and require way too much power to operate... Really not fit for flying with the BEXUS!
They are of course designed to handle a very large variety of "situations" and to be used for many different applications.
That's one downside of our cheaper setup: it does not have such flexibility. We have to build the safety measures ourselves, to make sure we do not let too much current in the chip, for example, or to avoid overheating amplifiers.


But calculating the needed components for the wanted ranges of operation is not all!
You might remember that we want to test a few different kinds of solar cells... As a total, we are going to mount photovoltaic devices from six different materials on our BEXUS gondola!
What does this translate to?
Six times the requirements for operational ranges, six different layouts for the pins with which we need to apply the Voltage and read the Currents, and a whole lot of cables and connections to take care of!
But Steven fixed this, as well: he packed all the cables in some extremely pretty Printed Circuit Boards, which are like thick sheets of copper and insulators, and contain the various connections within them, on separate layers. They also have a shielding copper plate, to avoid signal distortion.
Can you believe that there are the equivalent of 149 cables in these green sheets?


OSCAR's logo is there, you will notice.
This is because our engineers are actually artists at heart ;-)

Now, the work is far from done... the PCBs contain the connections, but they don't have the contacts for the devices on them, for example. And attaching all those tiny pins is quite tedious, besides being potentially dangerous!


PS: have you checked out the short musical version of this story yet? It's on our Youtube channel!

donderdag 4 augustus 2016

Integration Progress Review highlights

Last week, we had our Integration Progress Review, also called "IPR".
Like for all space projects, the entire process needs to be constantly monitored and reviewed, to make sure things are going smoothly.
Also for REXUS/BEXUS projects, we are constantly supervised by our sponsoring agencies, who make sure that we are on schedule and that nothing is unaccounted for.


So... we mounted our experiment on a mock-up of the gondola (the metallic cubic frame which will be attached to the balloon), and it looks like what you see in the photo above! Say "Hello!" to OSCAR!

During the meeting, the entire team had the chance to meet our ESA mentor, we discussed the progress with the BEXUS 23 payload manager (who is particularly concerned about the safety hazards related to our experiment... not many!).


The experts brought with them a spectrum analyzer, as well, which allowed us to test that our home made Radio Frequency sweep is staying within the range we need to measure the magnetic field. We can thus be certain our measurement (between 2.82 and 2.9 GHz) does not disturb the data transmission to ground (around 2.4-2.5 GHz)... we and the other teams sure need the data to come down!



We can not yet lay back and relax. The newt review is scheduled for mid September, just before flight! By then, everything needs to be ready!
But in the meantime, we can release some stress over a nice beer with ESA mentor!

donderdag 28 juli 2016

Testing our way to IPR

IPR (Integration Progress Review) is coming up TOMORROW.
This means we really need to get our experiment ready for flight, and one of the most important things for space-related missions is: TEST!
Make sure you beat Murphy's Law! ... or at least limit its power as much as you can.

Among the various things to verify are: will our experiment withstand stratospheric temperatures and pressures? Will it withstand vibrations? Ans so on...



OSCAR: "How do we test vibration?"
Experts: "Living in Belgium? Just drive around on any road with your experiment in the back of a truck!"

... And so we did!


We also started testing our magnetometer (Aury). Jarda and Jelle did an awesome job in building her up, and she has already passed our vacuum testing.
See her inside the vacuum bell? She worked for over 5 hours at a pressure of 20 mbar.
Way to go, Aury!


Cross your fingers for us, you all: tomorrow's review is a crucial step towards our balloon flight!